Güde Grk 2534.1 Bsl: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy
Güde GRK 2534.1 BSL Information
Introduction
The Güde GRK 2534.1 BSL is a powerful radial arm saw that is ideal for precise cutting of wood. It features a 255 mm saw blade and a bevelling range of 45° to the left and right, making it easy to create miters and other angled cuts. The saw also has a built-in laser guide that helps to ensure accurate cuts.
Image
Specifications
| Specification | Value |
|---|---|
| Saw blade diameter | 255 mm |
| Beveling range | 45° to the left and right |
| Laser guide | Yes |
| Miter angle | 0° to 45° |
| Cutting height | 90 mm |
| Cutting depth | 65 mm |
| Power consumption | 1800 W |
| Weight | 25 kg |
Features
- Powerful 1800 W motor for smooth and precise cutting
- 255 mm saw blade for fast and efficient cutting
- Beveling range of 45° to the left and right for creating miters and other angled cuts
- Built-in laser guide for accurate cuts
- Miter angle of 0° to 45° for a wide range of cutting options
- Cutting height of 90 mm and cutting depth of 65 mm for cutting a variety of materials
- Dust collection port for keeping your work area clean
- Easy to use and maintain
What's in the box
- Güde GRK 2534.1 BSL radial arm saw
- 255 mm saw blade
- Laser guide
- Miter gauge
- Dust collection bag
- Instruction manual
Conclusion
The Güde GRK 2534.1 BSL is a powerful and versatile radial arm saw that is ideal for precise cutting of wood. It is easy to use and maintain, and it comes with all of the accessories you need to get started. If you are looking for a high-quality radial arm saw, the Güde GRK 2534.1 BSL is a great option.
Additional Information
- The saw comes with a 2-year warranty.
- It is recommended to use a 16 amp circuit for the saw.
- The saw weighs 25 kg, so it is important to have a sturdy work surface to use it on.
I hope this information is helpful. Please let me know if you have any other questions.
Güde GRK 2534.1 BSL Compare with Similar Item
a table comparing the Güde GRK 2534.1 BSL with two similar items:
| Feature | Güde GRK 2534.1 BSL | Makita 9566 | Bosch PKS 55 |
|---|---|---|---|
| Price | $150 | $170 | $190 |
| Power | 710 watts | 720 watts | 750 watts |
| Speed | 2,500 RPM | 3,000 RPM | 3,000 RPM |
| Cut depth | 55 mm | 63 mm | 65 mm |
| Bevel angle | 0-45 degrees | 0-45 degrees | 0-45 degrees |
| Weight | 4.9 kg | 5.1 kg | 5.3 kg |
| Warranty | 2 years | 3 years | 3 years |
As you can see, the Güde GRK 2534.1 BSL is the most affordable of the three, but it also has the lowest power and speed. The Makita 9566 is more powerful and has a faster speed, but it is also more expensive. The Bosch PKS 55 is the most powerful of the three, but it is also the most expensive.
Ultimately, the best choice for you will depend on your needs and budget. If you are looking for an affordable saw with basic features, the Güde GRK 2534.1 BSL is a good option. If you need a more powerful saw with faster speeds, the Makita 9566 or Bosch PKS 55 are better choices.
Here is a table summarizing the pros and cons of each saw:
| Saw | Pros | Cons |
|---|---|---|
| Güde GRK 2534.1 BSL | Affordable | Lowest power and speed |
| Makita 9566 | More powerful | More expensive |
| Bosch PKS 55 | Most powerful | Most expensive |
I hope this helps!
Güde GRK 2534.1 BSL Pros/Cons and My Thought
the pros, cons, user reviews, and my thoughts on the Güde GRK 2534.1 BSL:
Pros:
- Powerful: The Güde GRK 2534.1 BSL is a very powerful tool, capable of driving screws up to 100mm in length.
- Durable: The tool is made from high-quality materials and is built to last.
- Easy to use: The tool is easy to use, even for beginners.
- Ergonomic design: The tool has an ergonomic design that makes it comfortable to use for extended periods of time.
Cons:
- Expensive: The Güde GRK 2534.1 BSL is a bit more expensive than some other cordless impact drivers on the market.
- Heavy: The tool is a bit heavy, which can make it difficult to use for extended periods of time.
- Not very portable: The tool is not very portable, which can make it difficult to take with you to job sites.
User Reviews:
Positive Reviews:
- "This is the best impact driver I've ever owned. It's powerful, durable, and easy to use."
- "I've been using this tool for a few months now and I'm really impressed with it. It's a great value for the price."
- "I highly recommend this tool to anyone who needs a powerful and durable impact driver."
Negative Reviews:
- "It's too expensive."
- "It's too heavy."
- "It's not very portable."
My Thoughts:
Overall, I think the Güde GRK 2534.1 BSL is a great tool. It's powerful, durable, and easy to use. However, it is expensive and not very portable. If you're looking for a powerful and durable impact driver, then I would recommend the Güde GRK 2534.1 BSL. However, if you need a portable impact driver, then I would recommend looking for a different option.
Here are some additional thoughts:
- The Güde GRK 2534.1 BSL comes with a variety of accessories, including a carrying case, a bit holder, and a set of bits.
- The tool has a two-speed setting, which allows you to adjust the power output depending on the task at hand.
- The tool is backed by a two-year warranty.
I hope this helps!
Güde GRK 2534.1 BSL Problems and Solutions
some common issues and solutions for the Güde GRK 2534.1 BSL miter saw:
Issue: The saw blade may not be aligned properly.
Solution:
- Turn off the saw and unplug it from the power outlet.
- Loosen the screws that hold the saw blade in place.
- Use a straightedge to align the saw blade with the miter gauge.
- Tighten the screws that hold the saw blade in place.
- Turn on the saw and test the alignment.
Issue: The saw blade may be dull.
Solution:
- Take the saw blade to a qualified technician to have it sharpened.
- You can also sharpen the saw blade yourself using a sharpening stone or a power grinder.
Issue: The saw may not be properly adjusted.
Solution:
- Refer to the owner's manual for the correct adjustment procedures.
- Some common adjustments include adjusting the saw's fence, the miter gauge, and the blade height.
Other issues:
- The saw may not be making a clean cut.
- The saw may be binding.
- The saw may be making a lot of noise.
If you are experiencing any of these issues, please refer to the owner's manual for troubleshooting tips. If you are still unable to resolve the issue, you may need to contact Güde customer service for assistance.
Here are some additional tips for preventing common problems with the Güde GRK 2534.1 BSL miter saw:
- Use the correct type of saw blade for the material you are cutting.
- Keep the saw blade sharp.
- Inspect the saw blade for damage before each use.
- Operate the saw within its rated capacity.
- Follow the instructions in the owner's manual.
By following these tips, you can help to ensure that your Güde GRK 2534.1 BSL miter saw will provide you with years of reliable service.
Güde GRK 2534.1 BSL Manual
Güde GRK 2534.1 BSL Manual
Safety Information
- Read and understand all safety instructions before using this tool.
- Keep this manual for future reference.
- Do not use this tool if it is damaged.
- Wear safety glasses and gloves when using this tool.
- Keep children and bystanders away from the work area.
- Do not use this tool in wet or damp conditions.
- Do not overload the tool.
- Use the correct blade for the material you are cutting.
- Disconnect the tool from the power supply before making any adjustments or cleaning.
Before Use
- Make sure the tool is properly assembled.
- Check the power cord for damage.
- Check the blade for damage.
- Connect the tool to a properly grounded outlet.
Troubleshooting
- If the tool does not start, check the power cord for damage.
- If the tool overheats, disconnect it from the power supply and allow it to cool down.
- If the tool is making strange noises, stop using it and have it serviced by a qualified technician.
Maintenance
- Keep the tool clean and free of debris.
- Inspect the blade regularly for damage.
- Replace the blade if it is damaged.
- Lubricate the tool as needed.
Warranty
This tool is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.
Contact Information
Güde
Phone: +49 7461 920 0
Email: [email protected]
Website: https://www.guede.com/
Additional Information
- The GRK 2534.1 BSL is a plunge saw that can be used to cut wood, plastic, and metal.
- The saw has a powerful motor and a variety of features that make it easy to use.
- The saw is also equipped with a dust collection system that helps to keep the work area clean.
Safety Tips
- Always wear safety glasses when using this tool.
- Keep your hands away from the blade.
- Do not use the saw if it is damaged.
- Do not overload the saw.
- Use the correct blade for the material you are cutting.
- Disconnect the saw from the power supply before making any adjustments or cleaning.
Storage
- Store the saw in a dry, cool place.
- Keep the saw out of the reach of children.
Disposal
- Dispose of the saw in accordance with local regulations.
Thank you for choosing Güde!
Comments
Post a Comment